Contributor

Mark Donahue Mark Donahue is an associate editor for Telephony magazine. Previously, he worked in The Associated Press’ Chicago bureau, as well as two trade publications. He graduated from...more

Are We Ready for The Exabyte Tsunami? Not Without Network Enhancements and Standards, Industry Leaders Say

The consensus of more than 30 telecom industry executives participating in an executive roundtable hosted by DSM is that today’s broadband network infrastructure is not prepared for future bandwidth demands and that substantial performance enhancements and new standards are necessary to support the next generation of bandwidth-hungry applications.


Participants in the Designed for the Future Executive Roundtable – representing communications service providers, infrastructure vendors, fiber optic cable and optical fiber makers, industry association leaders, academics and media – addressed the ability of incumbent networks to support future bandwidth demand, what is and will be creating that demand, and the risks associated with not embracing industry standards. Designed for the Future was held Sept. 29th during the FTTH 2009 Conference in Houston, Texas.


“It is no secret that the network infrastructure in the U.S. is aging while applications are evolving beyond what the basic design network can ultimately support,” said Rob Crowell, Vice President Fiber Optic Materials, DSM Desotech. “The question is ‘How do we ensure the network is prepared to support rich applications, such as IPTV, which consumers are experimenting with today and will consume much more of in the future with minimal latency and disruption and less energy consumption?”


At the roundtable, Crowell set the stage by citing a report on bandwidth demand from the Cisco’s Global Consumer Internet Traffic Forecast, which states that bandwidth demand will exceed 15 exabytes per month by 2011 and pass 30 exabytes per month by 2013. The group was charged with identifying the opportunities, obstacles and solutions to meeting that demand.


The roundtable concurred that optical fiber is the way forward to realizing true broadband potential. It was noted that increasing bandwidth demands will necessitate opening up new transmission windows in the L band, potentially up to 1625 nm, and that older-generation optical fiber running in many broadband networks will not be adequate to support those transmissions.


To get to the heart of whether or not the right infrastructure is in place to support future bandwidth demand, the group outlined four key areas in which applications are currently driving and will continue to create even greater demand for broadband: entertainment, education, medicine and mobile.


On the entertainment front, video was identified at the top of the list of bandwidth-demanding applications. The group noted that the new 3-D HD video applications which are expected to be commercially available in 2010 will require 160Mbps downstream speed. Developmental applications such as Ultra High HDTV, Quad HD, and Holographic Video will also require far more bandwidth than even the highest resolution HDTV today. Upstream speeds will become more important as today’s Internet users seek to share and store more content.


In education, remote learning and virtual classrooms aided by real-time collaboration systems, online content storing and sharing systems, and telepresence platforms will offer many more students access to top universities, while giving them the same learning experience as a student sitting in the classroom. Making this a reality will require significant broadband infrastructure and robust networks capable of handling an ever growing amount of traffic.


Telemedicine, in particular teleradiology, medical telematics and remote tele-conferencing were cited as healthcare applications that will require massive amounts of data transmission, which will have to be supported by fast, reliable networks.


In the mobile arena, the emergence of “superphones”, such as the Apple iPhone and Google G-1, is creating a demand for mobile data and entertainment that will grow mobile bandwidth requirements tenfold. Analysts estimate that mobile carriers will need 90,000 Gbps of capacity in the last mile of the backhaul network by 2014.


Given the costs of optical network deployment and the life-cycle expectations of 20 to 30 years in the field, defects and field failures represent a risk too high to ignore. Consideration for the development of standards is warranted not only to protect those making the network investment, but also to ensure that viable network structures are being put in place worldwide that will be able to sustain bandwidth requirements that are as yet unknown.


“The goal of the roundtable discussions we have hosted both in China and the U.S. is to hone in on solutions and a collective path forward,” said Crowell. “At DSM, we are developing coatings that will ensure durability, performance and sustainability of fiber-optic networks. Our hope is that we can get understanding and alignment within the industry to ensure a dynamic network that is prepared for any consumer or enterprise innovation imaginable.”


To learn more about this Designed for the Future roundtable discussion, please visit www.supercoatings.com. To download the full report, http://tinyurl.com/FTTH-Roundtable.


About DSM Desotech

DSM Desotech is the world’s leading developer of UV-curable optical fiber coatings, a critical component of high-speed optical fiber networks. With more than 40 years experience in fiber coatings development, the company holds more than 120 U.S. patents in UV-curable technology, with other patents in Europe, Asia-Pacific, Australia and Canada. DSM Desotech operates globally, with research and manufacturing facilities located in the U.S., Europe, China and Japan. It is headquartered in Elgin, Ill., USA. DSM Desotech is a business unit of DSM Resins, based in the Netherlands, and is part of the global DSM family – a world leader in life sciences and material sciences. More information can be found at: www.supercoatings.com.


About DeSolite Supercoatingsâ„¢

DSM’s newest generation of fiber coatings, DeSolite Supercoatingsâ„¢, has been engineered to significantly improve microbending sensitivity at the fastest processing speeds, ensuring the best economy of high speed production and superior attenuation performance. In standard basket-weave testing, DeSolite Supercoatingsâ„¢ display 90% less sensitivity to microbend attenuation—a performance advantage critical for today’s new FTTx designs, especially at the longer wavelengths of 1625nm. In addition to improved microbending sensitivity, DeSolite Supercoatingsâ„¢ demonstrate high reliability in temperature extremes, ensuring a robust solution especially in low temperature environments. Other enhanced performance properties include reduced volatility, faster cure speed and advanced mechanical properties.


About DSM – the Life Sciences and Materials Sciences Company

Royal DSM N.V. creates innovative products and services in Life Sciences and Materials Sciences that contribute to the quality of life. DSM’s products and services are used globally in a wide range of markets and applications, supporting a healthier, more sustainable and more enjoyable way of life. End markets include human and animal nutrition and health, personal care, pharmaceuticals, automotive, coatings and paint, electrical and electronics, life protection and housing. DSM has annual net sales of EUR 9.3 billion and employs some 23,500 people worldwide. The company is headquartered in the Netherlands, with locations on five continents. DSM is listed on Euronext Amsterdam. More information can be found at: www.dsm.com.


For more information:

For DSM Desotech

Patrick Foarde

Ketchum Inc.

patrick.foarde@ketchum.com

404-879-9254


®: registered trademarks of DSM

â„¢: trademarks of DSM

Protection of Trademarks and Copyright:

DSM cordially asks those who use this press release to use the classic registered trademark symbol ® and indicate DSM as the owner of the trademark quoted. The use of images made available by DSM is authorized only in reference to DSM editorial material. For other uses, please ask DSM authorization. The same indications are extended to the trademarks of the clients of DSM.


Forward-looking statements

This press release contains forward-looking statements. These statements are based on current expectations, estimates and projections of DSM management and information currently available to the company. The statements involve certain risks and uncertainties that are difficult to predict and therefore DSM does not guarantee that its expectations will be realized. Furthermore, DSM has no obligation to update the statements contained in this press release.

Comments are closed.

About

Stay up to date on the latest news. Select press representatives post company news several times a day. Check back often to get the latest news on product releases, mergers and acquisitions, and product applications. To be included in this virtual press conference, please contact The Briefing Room.

Calendar

October 2009
M T W T F S S
« Sep   Nov »
 1234
567891011
12131415161718
19202122232425
262728293031  

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication